SIGRIST - Aquascat S 探棒式濁度監測儀


AquaScat 根據 IEC 27027 測量飲用水的濁度,測量直接在水中進行。

這將維護工作減少到最低限度。校準是通過在需要時安裝的檢查單元完成的。通過數據可視化和 PLC/SCADA 連接的不同選項,可以滿足不同客戶的需求。得益於不同的過程集成選項,幾乎可以找到滿足任何要求的解決方案。


  • 直接在水中測量
  • 使用二級標準重新校準 - 可以進行精確的重新校準
  • 最低的雜散光水平,也在高反射不銹鋼管中
Measuring principle 90° Scattered light according to ISO 7027/EN27027
Nominal range 0 .. 4’000 FNU
Scale ranges 8, freely programmable
Resolution 0.001 FNU
Enclosure Stainless steel 1.4571, PPSU, sapphire
Protection index IP68 (Electrical connector IP67)
Sample flow rate max. 3.0 m/s
Sample temperature 0 .. +60 °C
Sample pressure max. 10 bar @ 20 °C
Ambient temperature 0 .. +60 °C
Humidity 0 .. 100 % rel.
Supply voltage 24 VDC +/−10 %, galv. Isolated from housing of sensor
Power input max. 2 W
Dimensions Ø 40 × 200 mm
Connections 8-wire cable:
  - 1 × 0/4 .. 20 mA Output
  - 2 × digital outputs
   
  Option Connection box Conn-R:
  - 1 × 0/4 .. 20 mA Output
  - 2 × Relays Outputs 230 VAC, 4A
  - Connector for SICON-C
   
  Option SICON – SICON-M:
  - Max. 8 × 0/4 .. 20 mA Outputs
  - Max. 7 × digital Outputs
  - Max. 5 digital Inputs
  - Modbus TCP
  - Modbus RTU
  - Profibus DP
  - HART
  - Conn-A for max. 8 Sensors
  - Powerbox for max. 12 Relays
   
  Option WLAN:
  - IEEE 802.11b/g/n access with web server
Light source LED 860 nm
Sample connector Options:
  - PE tubing welded
  - Stainless steel tubing with flanges welded
  - Kit to install directly in basins
  - Device to retract the sensor under pressure
Control Units SICON
  SICON M